Yellow Jackets Leopard ADULT Screen Print Transfer

COLOR: One Color, Black
SIZE: 11.9x11.9"
TEMPERATURE: 325 Degrees Fahrenheit
PRE-PRESS: Pre-press fabric (not transfer) for 7 seconds to remove wrinkles & moisture
TIME: 7 Seconds
PRESSURE: High Pressure (60PSI Automatic; HEAVY 8-9 Manual)
PEEL: Hot Peel/Immediately
HEAT PRESS IS REQUIRED. You must have even time, temp, and pressure. Do not use a home iron or Easy Press.

DO NOT USE TEFLON SHEETS, PARCHMENT PAPER, COVERS, ETC. OR PILLOWS.

Screen print transfers are great for most fabrics and colors. They can easily be applied to cotton, polyester, &/or blends.  Please test if you're using waterproof, water resistant, or fireproof garments.

You are more than welcome to use my listing images, but you MUST use a watermark that will be placed over the design.  Please do not post without your watermark.  If you post without your watermark, you are going against my TOU.  The first image in each listing will state measurements & that it's a screen print transfer. It will also have a very light GS watermark over the design.  The second listing image will be void of those EXCEPT the very light GS watermark.  I will not provide alternate mockups.  I have pressed each transfer, so if I've taken a real life, in use picture, it'll be the third/last image.  Of course, please take lighting & the fact I use my cell phone to snap into account--the area I press in has awful lighting (will remedy that soon 😉) & I try not to use flash.

My suggested temps are just starting points.  They may vary based on your heat press. I highly recommend a heat gun to check your heat press temperature.  If you're unfamiliar with my transfers please consider ordering a test print.

I will not refund due to user error.  Please calibrate and make sure your heat press has even temperature, time, & pressure needed for each transfer.